Skip to product information
1 of 8
  • Health Canada Licensed MDL
  • FCC Approved
  • FDA Cleared 510(k)

Advanced LED Light Therapy Facial Mask

Advanced LED Light Therapy Facial Mask

  • 186 medical-grade LEDs (744 chips total) - denser coverage than entry level masks
  • 6 Four published-research wavelengths: 415nm blue, 590nm yellow, 660nm red, 850nm near-infrared
  • Six smart modes: Morning, Bedtime, Anti-Aging, Anti-Acne, Brightening, Repairing
  • 5000mAh battery + OLED display + 50/75/100% brightness control
  • Health Canada Licensed MDL and FDA Cleared 510K
  • Portable & Rechargeable & Travel Case Included
Regular price $229.99 CAD
Regular price $125.00 CAD Sale price $229.99 CAD
Sale Sold out
Quantity
View full details

Collapsible content

Product Description

Canada's First Health Canada Licensed LED Mask in This Price Range

A Health Canada Medical Device Licence (MDL) is required for any device in Canada classified as a Class II medical device - the same category as devices used in professional skincare clinics. The byTheia Advanced LED Light Therapy Facial Mask is the first in our lineup to meet this standard. It is not a cosmetic gadget. It is a medically registered light therapy device for serious skincare.
186 LEDs, four wavelengths, one mask that does it all. The Advanced LED mask is built around 186 high-quality LEDs - 744 chips total - emitting four scientifically targeted wavelengths: blue (415nm) for blemishes, yellow (590nm) for tone, red (660nm) for collagen, and near-infrared (850nm) for deeper repair and hydration. This is the complete clinical wavelength set, in one device.

Six smart modes for every hour of your skin's day. Morning Skincare for clarity, Bedtime Skincare for recovery, Anti-Aging for firmness, Anti-Acne for breakouts, Brightening for tone, and Repairing for post-treatment skin. Each mode runs the right wavelength combination at the right intensity — you choose the goal, the mask handles the protocol.


Medical-grade silicone that fits like a second skin. Unlike rigid plastic masks, the Advanced LED is crafted from soft, flexible medical-grade silicone that conforms to the contours of your face and neck. Foldable, portable, and secured with an adjustable buckle — maximum LED contact, hands-free comfort, every session.


Powerful 5000mAh battery. Session after session without constantly plugging in. Charge once, run roughly 8-10 full treatments. Whether you're at home or travelling, the routine doesn't stop.


Three brightness levels — your skin, your intensity. Fine-tune your treatment with 50%, 75%, or 100% brightness output, plus a built-in pulse mode and an OLED display for effortless control. Equally suitable for sensitive first-time users and customers ready for maximum results.

Key Benefits:

  • Boosts skin firmness and elasticity: Red and near‑infrared light support collagen and elastin to reduce the appearance of fine lines and wrinkles.​
  • Targets acne‑causing bacteria: Blue light helps neutralize acne bacteria and balance oil for clearer, smoother‑looking skin.​
  • Brightens and evens skin tone: Yellow and red wavelengths work together to fade the look of dark spots and dullness for a more radiant complexion.​
  • Soothes redness and inflammation: Helps calm stressed, sensitized skin and promotes healthier‑looking tissue recovery.​
  • Comfortable, hands‑free design: Soft, flexible silicone with an adjustable buckle provides a secure fit while you relax or move around.​
  • Easy at‑home routine: Six preset therapy modes and three intensity levels make it simple to integrate into morning and evening skincare.​

What's Included

  • LED silicone face mask (face + neck coverage)​
  • Controller with OLED display​
  • Silicone safety goggles​
  • Adjustable strap/buckle​
  • Type‑C charging cable​
  • Carrying bag​
  • User manual

Product Specifications

  • Product Name: Advanced LED Light Therapy Facial Mask
  • Model: BTFM03
  • Charging Voltage: 5V / 2A (USB-C)
  • Battery Capacity: 5000 mAh
  • Working Current: ≤ 3.5A
  • Working Rated Power: ≤ 15W
  • Face Piece Dimensions: 310 × 207 × 4.5 mm
  • LED Quantity: 122 LEDs
  • Total LED Chips: 744 chips for dense, even coverage
  • Wavelengths: 415nm : 590nm : 660nm : 850nm (1:1:1:1)
  • Session Duration: 10 minutes (auto shut-off)
  • Energy Levels: 3 adjustable levels via controller
  • Display: OLED Screen on controller
  • Material : Medical-Grade Flexible Silicone
  • Connectivity: USB-C charging port (dual input/output)
  • Regulatory Clearance; FDA 510(k) K250830 • Health Canada Licensed MDL
  • Warranty: 12 months from date of purchase
  • Manufacturer: kobeswh.com inc. DBA bytheiallc - Markham, ON

Sensitivity Test

1. Place the device in contact with your skin. Recommended areas include the inner thigh, arm or back of the hand.

2. Run for 10 minutes. Mild redness is normal and should resolve within 1–2 hours.

3. . If redness, itching, or irritation persist, discontinue use and consult a healthcare professional or dermatologist before proceeding.

Contraindications

 Do Not Use If:

  • Using beyond the approved indications for use
  • Pregnant or breastfeeding (consult a healthcare professional first)
  • You have dermatological conditions affecting the eyes or skin (e.g., lupus erythematosus, photosensitive eczema, or albinism) — use only under supervision of a dermatologist
  • You have photosensitivity disorders or are taking medications that may cause photosensitivity

Additional Warnings

  • Use strictly according to instructions - improper use may cause malfunction or skin reactions
  • Always wear the provided silicone safety goggles during use
  • Keep out of reach of children — not intended for infants or children
  • Do not immerse in water or rinse with liquids
  • Do not use if any parts are damaged or malfunctioning
  • Discontinue use immediately if you experience discomfort, irritation, or unexpected reactions
  • Do not use on the same day as skincare products containing photosensitive ingredients
Clinical study results: 93% of participants experienced relief from sensitive skin inflammation after 8 weeks of red LED therapy Mobile version of Clinical study results: 93% of participants experienced relief from sensitive skin inflammation after 8 weeks of red LED therapy
LED collagen therapy results: 87% reduction in wrinkling severity score, 90% visible wrinkle depth reduction after 12 treatments LED collagen therapy results: 87% reduction in wrinkling severity score, 90% visible wrinkle depth reduction after 12 treatments mobile version
LED mask clinical evidence: 87% improved collagen density and skin firmness, 100% confirmed improved skin condition after 2–3 months LED mask clinical evidence: 87% improved collagen density and skin firmness, 100% confirmed improved skin condition after 2–3 months mobile version

6 Auto Switching Treatment Modes

Six intelligent therapy modes with Near Infrared Light (NIR) for deeper penetration and a routine built around your day.

Gallery Mode
Gallery Mode
Gallery Mode
Gallery Mode
Gallery Mode
Gallery Mode
Repairing Mode

Stimulates collagen and elastin to accelerate skin repair, recovery, and tissue healing. Soothes inflammation, reduces redness, and strengthens the skin’s natural moisture barrier.

Pigmentation & Skin Tone Mode

Enhances local microcirculation and renewal to target pigmentation and brighten dullness. Supports a more even, radiant appearance by promoting healthy skin cell turnover.

Anti Aging Mode

Boosts collagen production to significantly reduce fine lines and tighten the skin.Increases overall elasticity and firmness for a noticeably more youthful complexion.

Revitalization Mode

Refines skin texture and improves circulation to reduce the appearance of morning puffiness. Works to refresh the overall tone and complexion for a healthier, revitalized look.

Anti Acne Mode

Controls acne-producing bacteria to reduce active breakouts and prevent future spots. Helps to decrease inflammation and minimize scarring for improved skin clarity.

Intensive Regeneration Mode

Combines all wavelengths to stimulate collagen, repair texture, and sterilize bacteria. Delivers a comprehensive cycle for maximum recovery and total skin health.

Why the Advanced LED is our most-recommended Mask?

If you've ever asked the byTheia team 'which mask should I buy?' - this is the answer most of the time. Four out of five returning customers who first bought the 7-Colour upgrade to this one. The reason is simple: it has every wavelength the published photobiomodulation research actually cites (415, 590, 660, 850nm), the smart-mode preset library means you don't have to remember a protocol, and at $229.99 it's the most clinical credibility you can get without stepping into FDA 510(k)-cleared medical-device pricing. For most skin and most goals, this is the right tool.

How to Use

How to use byTheia Advanced LED light therapy mask step 1 - cleanse and dry face thoroughly before medical-grade silicone mask session

Step 1 : Prep your skin

Cleanse your face thoroughly and ensure skin is completely dry and free of makeup before each session.

How to use byTheia Advanced LED light therapy mask step 2 - unfold foldable medical-grade silicone mask and secure with adjustable buckle for hands-free fit

Step 2 : Set up the mask

Remove the protective film from the mask, put on the provided silicone eye protectors, secure the adjustable strap comfortably around your head, and connect the mask to the controller.

How to use byTheia Advanced LED light therapy mask step 3 - use OLED controller to select treatment mode and set brightness intensity to 50 75 or 100 percent

Step 3 : Power on and select your mode

Press and hold the power button for 3 seconds to turn on the device, then select your desired therapy mode based on your skin concern. Adjust the brightness level if needed.

How to use byTheia Advanced LED light therapy mask step 4 - run 10 minute Health Canada licensed LED phototherapy session with 186 LEDs and four wavelengths

Step 4 : Run your session

Allow the device to run for the preset session duration — it will stop automatically. Recommended use is 3–4 times per week, with each session lasting 10–20 minutes, unless otherwise directed by a healthcare professional.

How to use byTheia Advanced LED light therapy mask step 5 - remove silicone mask and apply serum or moisturiser immediately for maximum post-LED absorption

Step 5 : Remove and follow up

Remove the mask using the strap and power off the device. After your session, you may apply your regular skincare products. Gently wipe the mask with a soft, dry cloth and store in a cool, dry place away from direct sunlight.

How to use byTheia Advanced LED light therapy mask step 1 - cleanse and dry face thoroughly before medical-grade silicone mask session

Step 1 : Prep your skin

Cleanse your face thoroughly and ensure skin is completely dry and free of makeup before each session.

How to use byTheia Advanced LED light therapy mask step 2 - unfold foldable medical-grade silicone mask and secure with adjustable buckle for hands-free fit

Step 2 : Set up the mask

Remove the protective film from the mask, put on the provided silicone eye protectors, secure the adjustable strap comfortably around your head, and connect the mask to the controller.

How to use byTheia Advanced LED light therapy mask step 3 - use OLED controller to select treatment mode and set brightness intensity to 50 75 or 100 percent

Step 3 : Power on and select your mode

Press and hold the power button for 3 seconds to turn on the device, then select your desired therapy mode based on your skin concern. Adjust the brightness level if needed.

How to use byTheia Advanced LED light therapy mask step 4 - run 10 minute Health Canada licensed LED phototherapy session with 186 LEDs and four wavelengths

Step 4 : Run your session

Allow the device to run for the preset session duration — it will stop automatically. Recommended use is 3–4 times per week, with each session lasting 10–20 minutes, unless otherwise directed by a healthcare professional.

How to use byTheia Advanced LED light therapy mask step 5 - remove silicone mask and apply serum or moisturiser immediately for maximum post-LED absorption

Step 5 : Remove and follow up

Remove the mask using the strap and power off the device. After your session, you may apply your regular skincare products. Gently wipe the mask with a soft, dry cloth and store in a cool, dry place away from direct sunlight.

How to use byTheia Advanced LED light therapy mask step 1 - cleanse and dry face thoroughly before medical-grade silicone mask session

Step 1 : Prep your skin

Cleanse your face thoroughly and ensure skin is completely dry and free of makeup before each session.

How to use byTheia Advanced LED light therapy mask step 2 - unfold foldable medical-grade silicone mask and secure with adjustable buckle for hands-free fit

Step 2 : Set up the mask

Remove the protective film from the mask, put on the provided silicone eye protectors, secure the adjustable strap comfortably around your head, and connect the mask to the controller.

How to use byTheia Advanced LED light therapy mask step 3 - use OLED controller to select treatment mode and set brightness intensity to 50 75 or 100 percent

Step 3 : Power on and select your mode

Press and hold the power button for 3 seconds to turn on the device, then select your desired therapy mode based on your skin concern. Adjust the brightness level if needed.

How to use byTheia Advanced LED light therapy mask step 4 - run 10 minute Health Canada licensed LED phototherapy session with 186 LEDs and four wavelengths

Step 4 : Run your session

Allow the device to run for the preset session duration — it will stop automatically. Recommended use is 3–4 times per week, with each session lasting 10–20 minutes, unless otherwise directed by a healthcare professional.

How to use byTheia Advanced LED light therapy mask step 5 - remove silicone mask and apply serum or moisturiser immediately for maximum post-LED absorption

Step 5 : Remove and follow up

Remove the mask using the strap and power off the device. After your session, you may apply your regular skincare products. Gently wipe the mask with a soft, dry cloth and store in a cool, dry place away from direct sunlight.

Real outcomes - what 'visible change in 4-6 weeks' actually means

  • Weeks 1-2: Subtle calm, less inflammation, a 'plumped' look immediately post-session
  • Weeks 3-4: First visible firming around cheeks and jaw, fewer active breakouts
  • Weeks 5-6: Texture refinement, more even tone, fine lines softer in side-by-side comparison


Results vary based on starting skin condition, age, lifestyle, and consistency. The published research on red and near-infrared phototherapy supports these outcomes at the wavelengths and intensities the Advanced LED delivers.

Treatment plan - First 6 Weeks

Week Frequency Mode Rotation Brightness
Week 1 3 sessions Morning + Bedtime 50%
Week 2 3-4 sessions Add Anti-Aging or Anti-Acne (based on goal) 50-75%
Week 3-4 4-5 sessions Rotate by concern; alternate Anti-Aging and Repairing 75-100%
Week 5-6 3-4 sessions Maintenance rotation matched to current skin state 75%

byTheia Advanced LED Face Mask vs Other LED Masks

Features byTheia Advanced LED Face Mask Other LED Face Mask
Regulatory Clearance Health Canada Licensed MDL + FDA Cleared 510(k) K250830 Often uncleared consumer gadgets
Light Technology Auto-switching - cycles & blends colors automatically Manual only, one static color at a time
Material Soft medical-grade silicone, foldable with adjustable buckle Rigid plastic, limited comfort
LEDs & Coverage 186 LEDs · 744 chips — dense, even distribution Fewer LEDs, uneven coverage
Wavelengths 4 wavelengths per LED (415, 590, 660 ,850 nm) Typically 1–2 colors only
Intensity & Energy level control 3 energy levels, Controller adjusts three different energy levels, allowing users to tailor intensity to skin type and comfort May offer fixed intensity with little or no energy customization.
Portability Foldable + travel bag included Non-foldable, bulky
Eye protection ✓ Built-in ✗ None
Warranty ✓ 1 Year ✗ None

Frequently Asked Questions

Find answers to common questions about our products

Many users notice improvements in skin texture and radiance, such as a brighter complexion and smoother feel after a few weeks of consistent use. Improvements in firmness, fine lines, and pigmentation may take longer and vary from person to person.

Recommended use is 3–4 times per week, with a single session duration of 10–20 minutes, unless otherwise directed by a healthcare professional.

Yes, always wear the included silicone safety goggles to protect your eyes from direct LED exposure during every session.

Yes, and it's our most common upgrade path. You get four precisely-tuned medical-grade wavelengths (instead of approximate colour bands), six pre-set smart modes (instead of seven manual colour modes), and an OLED display with brightness control. If you've used the 7-Colour for a month and want more granularity, this is the mask.

Avoid using the mask on the same day as products containing photosensitizing ingredients (such as certain acids or retinoids). Always follow the guidance of your skincare professional if you are undergoing treatment.

Yes. The byTheia Advanced LED Light Therapy Facial Mask is a Health Canada Licensed Medical Device (MDL) and has also received FDA Clearance through the 510(k) process (K250830). It is intended for non-invasive dermatologic phototherapy as described in its intended use.

This product is covered by a 12-month warranty from the date of purchase, provided it has been used in accordance with the instructions in the user manual. Contact cs@bytheiallc.com for warranty support.

After each use, gently wipe the mask with a soft, dry cloth. Store in the included travel case in a cool, dry place away from direct sunlight and out of reach of children. Do not immerse the device in water.

The mask features a 5000 mAh battery. Initial charge time is approximately 3 hours using the included USB-C cable. The controller displays battery status on the OLED screen.

Do not disassemble, modify, or attempt to repair the device yourself ; stop using it and contact customer service for assistance and warranty support.