
6 Auto Switching Device Modes
Six intelligent therapy modes with Near Infrared Light (NIR) for deeper penetration and a routine built around your day.
Stimulates collagen and elastin to accelerate skin repair, recovery, and tissue healing. Soothes inflammation, reduces redness, and strengthens the skin’s natural moisture barrier.
Enhances local microcirculation and renewal to target pigmentation and brighten dullness. Supports a more even, radiant appearance by promoting healthy skin cell turnover.
Boosts collagen production to significantly reduce fine lines and tighten the skin.Increases overall elasticity and firmness for a noticeably more youthful complexion.
Refines skin texture and improves circulation to reduce the appearance of morning puffiness. Works to refresh the overall tone and complexion for a healthier, revitalized look.
Targets acne-causing bacteria in mild to moderate inflammatory acne. Helps to decrease inflammation and minimize scarring for improved skin clarity.
Combines all wavelengths across the full mode range. Delivers a comprehensive cycle for maximum recovery and total skin health.
How to Use
Step 1 : Prep your skin
Cleanse your face thoroughly and ensure skin is completely dry and free of makeup before each session.
Step 2 : Set up the mask
Remove the protective film from the mask, put on the provided silicone eye protectors, secure the adjustable strap comfortably around your head, and connect the mask to the controller.
Step 3 : Power on and select your mode
Press and hold the power button for 3 seconds to turn on the device, then select your desired therapy mode based on your skin concern. Adjust the brightness level if needed.
Step 4 : Run your session
Allow the device to run for the preset session duration — it will stop automatically. Recommended use is 3–4 times per week, with each session lasting 10–20 minutes, unless otherwise directed by a healthcare professional.
Step 5 : Remove and follow up
Remove the mask using the strap and power off the device. After your session, you may apply your regular skincare products. Gently wipe the mask with a soft, dry cloth and store in a cool, dry place away from direct sunlight.
Step 1 : Prep your skin
Cleanse your face thoroughly and ensure skin is completely dry and free of makeup before each session.
Step 2 : Set up the mask
Remove the protective film from the mask, put on the provided silicone eye protectors, secure the adjustable strap comfortably around your head, and connect the mask to the controller.
Step 3 : Power on and select your mode
Press and hold the power button for 3 seconds to turn on the device, then select your desired therapy mode based on your skin concern. Adjust the brightness level if needed.
Step 4 : Run your session
Allow the device to run for the preset session duration — it will stop automatically. Recommended use is 3–4 times per week, with each session lasting 10–20 minutes, unless otherwise directed by a healthcare professional.
Step 5 : Remove and follow up
Remove the mask using the strap and power off the device. After your session, you may apply your regular skincare products. Gently wipe the mask with a soft, dry cloth and store in a cool, dry place away from direct sunlight.
Step 1 : Prep your skin
Cleanse your face thoroughly and ensure skin is completely dry and free of makeup before each session.
Step 2 : Set up the mask
Remove the protective film from the mask, put on the provided silicone eye protectors, secure the adjustable strap comfortably around your head, and connect the mask to the controller.
Step 3 : Power on and select your mode
Press and hold the power button for 3 seconds to turn on the device, then select your desired therapy mode based on your skin concern. Adjust the brightness level if needed.
Step 4 : Run your session
Allow the device to run for the preset session duration — it will stop automatically. Recommended use is 3–4 times per week, with each session lasting 10–20 minutes, unless otherwise directed by a healthcare professional.
Step 5 : Remove and follow up
Remove the mask using the strap and power off the device. After your session, you may apply your regular skincare products. Gently wipe the mask with a soft, dry cloth and store in a cool, dry place away from direct sunlight.
Real outcomes - what 'visible change in 4-6 weeks' actually means
- Weeks 1-2: Subtle calm, less inflammation, a 'plumped' look immediately post-session
- Weeks 3-4: First visible firming around cheeks and jaw, fewer active breakouts
- Weeks 5-6: Texture refinement, more even tone, fine lines softer in side-by-side comparison
Results vary based on starting skin condition, age, lifestyle, and consistency. The published research on red and near-infrared phototherapy supports these outcomes at the wavelengths and intensities the Advanced LED delivers.
Treatment plan - First 6 Weeks
| Week | Frequency | Mode Rotation | Brightness |
|---|---|---|---|
| Week 1 | 3 sessions | Morning + Bedtime | 50% |
| Week 2 | 3-4 sessions | Add Anti-Aging or Anti-Acne (based on goal) | 50-75% |
| Week 3-4 | 3-4 sessions | Rotate by concern; alternate Anti-Aging and Repairing | 75-100% |
| Week 5-6 | 3-4 sessions | Maintenance rotation matched to current skin state | 75% |
byTheia Advanced LED Face Mask vs Other LED Masks
| Features | byTheia Advanced LED Face Mask | Other LED Face Mask |
|---|---|---|
| Regulatory Clearance | Health Canada Licensed MDL + FDA Cleared 510(k) K250830 | Often uncleared consumer gadgets |
| Light Technology | Auto-switching - cycles & blends colors automatically | Manual only, one static color at a time |
| Material | Soft medical-grade silicone, foldable with adjustable buckle | Rigid plastic, limited comfort |
| LEDs & Coverage | 122 LEDs · 488 chips — dense, even distribution | Fewer LEDs, uneven coverage |
| Wavelengths | 4 wavelengths per LED (415, 590, 660 ,850 nm) | Typically 1–2 colors only |
| Intensity & Energy level control | 3 energy levels, Controller adjusts three different energy levels, allowing users to tailor intensity to skin type and comfort | May offer fixed intensity with little or no energy customization. |
| Portability | Foldable + travel bag included | Non-foldable, bulky |
| Eye protection | ✓ Built-in | ✗ None |
| Warranty | ✓ 1 Year | ✓ 1 Year |
More Videos...
Frequently Asked Questions
Three to four times a week, 10–20 minutes per session, unless a healthcare professional tells you otherwise.
Mode 3 (Anti-aging, 660 + 850 nm) is the wrinkle-focused programme. Mode 4 adds 590 nm if you also want to work on texture and tone. Give either six weeks at three to four sessions a week before assessing.
Mode 5 (Anti-Acne, 415 nm) on its own, or Mode 6 if you want blue light combined with the red and near-infrared repair wavelengths.
Many users notice increased radiance and smoother texture within a few weeks. Firmness, fine lines and pigmentation take longer and vary from person to person. Individual results vary.
Yes, on clean dry skin before serums and moisturiser — but not on the same day you've used retinoids, acid exfoliants, or anything else photosensitising.
Soft, dry cloth. Never immerse it in water or rinse it. Store cool and dry, away from direct sunlight.
5000 mAh, charged over USB-C at 5 V / 2 A in roughly three hours. Charge it fully before first use.
It's foldable medical-grade silicone with an adjustable buckle, and it's cordless — designed to be worn hands-free while you move around the house rather than lying still.
No. This is a face-only device. The face-and-neck variant is not currently licensed and is not sold.
Twelve months from purchase, provided the device has been used according to the manual. Don't disassemble it - contact cs@bytheiallc.com instead.
